-
"Peep" Sight Gauge
Peep Sight Gauge Choose Brass or Nickle
Steel weld in bung included
$25
-
Tight-n0High Mids
Tight-n-High Mids for XS650s
1/4" thk Laser cut steel
Mounting tight and high
Counterbored 3/8" Mounting hole for your pegs
Mounting fasteners included
$25.99
-
Faucet Petcock
3/8 NPT 3/8 Hose
$25
-
XS650 Headlight Bracket
Custom XS650 Headlight Bracket
Requires drilling and tapping for the bolts included. See our how to video here.
$19.99
-
Passenger Pegs
Passenger Pegs
$19.99
-
"E" BOMB
The REDESIGNED “E” Bomb is a tank that has be designed specifically for the XS650 market to be utilized as a place to put wiring and electronic devices. It is a direct bolt on to the rear motor mount 8” Dia 14ga steel SS Hardware OPTIONAL IS our SS Speed Cap to give the oil tank look and be used as a stash tube. for additional $75
$175
-
"STR" Tank
2.4 Gal "STR" Tank “New”
----1954 to 1978 sportsters direct fit or Custom Application
---- 1/4" Rear Petcok location for total fuel usage (PETCOCK NOT INCLUDED)
-----Clear Fuel Hose sight gauge can be positioned anyway desired with chrome fittings ans stainless wire for hose clamping
---- Pressure Tested
----NOT Sealed
----Gas Cap (NOT included)
******Approximate Dimensions******15 1/2" Long******16 5/8" mount to mount holes are elongated****9" wide*******7" Tall****Tunnel 3 1/2" deepest point 2" wide
$155
-
"AX" Gas Tank
2.2 Gal "AX" Tank “New” For Custom Application
-----1/4"NPT Rear Petcock Location for total fuel usage (NOT INCLUDED)
-----Fuel Sight Gauge (with Brass fittings and clear fuel sight hose) & Stainless wire for hose clamping
----Pressure Tested
NOT Sealed
---Gas Cap (NOT INCLUDED)
*****Approximate Dimensions
*****15 1/2" Long
****18" mount to mount holes are elongated
****9"wide
****9" Tall
****Tunnel 3 1/2" deepest point
$225
-
UniPodKits
I.D. 2 1/4" x O.D 3" x L 3"
Item Completely washable
Chrome caps, dark gray foam, water-retardant foam element
Rubber base for perfect fit
Looks like new after every cleaning
Jetting changes may be required
*For 1981 and newer models use carb O.D. for fitment. (Please refer to sizing chart.)
$34.99
-
"3.1 Gal King STR"
3.1 Gal King STR Tank
1954 to 1978 sportsters direct fit or Custom Application
--- 1/4" Rear Petcok location for total fuel usage (PETCOCK NOT INCLUDED)
-----Clear Fuel Hose sight gauge with chrome fittings ans stainless wire for hose clamping
---- Pressure Tested
----NOT Sealed
----Gas Cap (NOT included)
$200
-
FRISCO "STR"
For Frisco Style Mounting high atop the backbone 2.5 GAL
$190
-
Speed Box
Made from 1/8" Steel----aluminum battery strap----Stainless Steel fasteners-----Fits Odyssey 545 & 680 and other batteries with dimensions 7 5/16"Lg x 3 7/16" W x 5"T---Stainless steel hardware
$110
-
Fuel Sight Gauge Kit
10" Clear Fuel Hose----(2) weld in bungs ----(2) chrome 90 deg fittings -----Stainless wire for hose clamping
$20
-
90 Degree P-Cok
90 Degree P-cok / 1/4" NPT Threads 5/16" Barb
$15
-
Horizontal "A" Brkt Light Included
Model "A" Tail light bracket----1/8" Steel----Stainless steel hardware
.Model A Tail Light INCLUDED
$100
-
Add Speed Cap to our tank
This cap can be added to any of our tanks. Please specify Left-Right-Center when ordering. Speed Cap Assembly is made of 304L S.S. 1 1/2" I.D Opening -----Teflon Seal --- Total Height 1 1/2"
$100
-
Gas Cap
Gas Cap for custom tanks
$15
-
Vertical "A" Bracket with Light
Model "A" Tail light bracket----1/8" Steel----Stainless steel hardware
.Model A Tail Light INCLUDED
$100
-
Odyssey Battery 545
Odyssey Battery Model PC545MJ & PC680MJ --------Metal Jacket for duralbility.------Odyssey is the battery that pumps out instant power for unbeatable performance. These dynamic power sources incorporate a rugged sealed design,combined with all the safety and vibration-resistant features you’d expect from the world’s leading drycell battery.
$120
-
"Fuck U" Tail ligt kit
Model "A" Tail light kit with "Fuck U" Lens
$75
-
Fuck U Tail Light Lens ONLY
Model "A" Tail Light Lens for our lights Lens ONLY
$30
-
35 mm Pandemonium Brake Kit
Pandemonium Brake Kit for 35mm XS650
---Adding the Pandemonium Brake Kit ™ to your Yamaha XS650 is a pretty straightforward process.
With the addition of a Brembo brake caliper.
You will have Pandemonium Brakes!
$39.99
-
XS650 Exhaust Kit
This Complete XS650 Exhaust Kit includes everything needed to build your entire exhaust. Items listed are included!
$99
-
Condor
This Fully Adjustable wheel locking system is capable of accepting front or rear wheels 15" - 22" or 80-220 mm wide.
The patented locking mechanism securely supports your motorcycle in an upright position on any type of flat surface or transport platform.
Requires only one person to load or unload any motorcycle in most cases.
$210
-
Brass Petcock
1/4" NPT All Brass
Accepts 5/16" & 3/8" Hose
$25
-
Pandemonium Speed Cap (ONLY)
Speed Cap Assembly is made of 304L S.S. 1 1/2" I.D Opening -----Teflon Seal --- Total Height 1 1/2"
$50
-
34 mm Pandemonium Brake Kit tm
Pandemonium Brake Kit for 34mm XS650---Adding the Pandemonium Brake Kit ™ to your Yamaha XS650 is a pretty straightforward process. With the addition of a Brembo brake caliper. You will have Pandemonium Brakes!
$39.99
-
Ya Mama XS650 Exhaust System
Ya Mama XS650 Exhaust System
1 1/2 Mandrel Bent Tubing
Exhaust Gaskets
Tig Welded Construction
Laser Cut Flanges
Stainless Steel Fasteners
Sold in Raw Finish
Only $209 + Shipping
$199
-
3" Bolt On Mirror
3" Dia Bolt on Mirror
$14.99
-
Anderson Foot Pegs
Stud mount footpeg set features chopper style pegs with original sand cast finish with mounting blocks.
Stud has 3/8" x 20 threads.
Fits:
All with 7/16" x 20 mount hole
$34.95
-
34 MM Fork Seal
34 MM Fork Seals
$7.99
-
35 MM Fork Seals
35 MM Fork Seals
$7.99
-
4.5 " Chrome Mini Headlight
Chrome plated mini headlight designed for use on highway bars as additional lighting. 12V, 30 Watt sealed beam, Hi-Lo indicator light, and bottom mount are all included. Parts also available separately.
$34.99
-
Starter Delete
Starter Delete Block off cap
they are a press fit into the starter hole, you must remove the seal first, then put some sealant around the plug and then drive it in with a large socket
$2.99
-
All Balls Wheel Bearings REAR Kit
All Balls Wheel Bearings Kit
$21.99
-
All Balls Steering Seal Kit for XS650
All Balls Steering Seal Kit For XS650
$39.99
-
Original KD's
The Orginal BIker Sunglasses
KD Sunglasses
$8.99
-
All Balls FRONT Wheel Bearing for XS650 Kit
All Balls Wheel Bearing FRONT for XS650 Kit
$21.99
-
"E" BOMB
The REDESIGNED “E” Bomb is a tank that has be designed specifically for the XS650 market to be utilized as a place to put wiring and electronic devices. It is a direct bolt on to the rear motor mount 8” Dia 14ga steel SS Hardware OPTIONAL IS our SS Speed Cap to give the oil tank look and be used as a stash tube. for additional $75
$175
-
"STR" Tank
2.4 Gal "STR" Tank “New”----1954 to 1978 sportsters direct fit or Custom Application---- 1/4" Rear Petcok location for total fuel usage (PETCOCK NOT INCLUDED)-----Clear Fuel Hose sight gauge can be positioned anyway desired with chrome fittings ans stainless wire for hose clamping---- Pressure Tested ----NOT Sealed----Gas Cap (NOT included)******Approximate Dimensions******15 1/2" Long******16 5/8" mount to mount holes are elongated****9" wide*******7" Tall****Tunnel 3 1/2" deepest point 2" wide
$155
-
"AX" Gas Tank
2.2 Gal "AX" Tank “New” For Custom Application-----1/4"NPT Rear Petcock Location for total fuel usage (NOT INCLUDED)-----Fuel Sight Gauge (with Brass fittings and clear fuel sight hose) & Stainless wire for hose clamping----Pressure Tested
NOT Sealed ---Gas Cap (NOT INCLUDED)*****Approximate Dimensions*****15 1/2" Long****18" mount to mount holes are elongated****9"wide****9" Tall****Tunnel 3 1/2" deepest point
$225
-
UniPodKits
I.D. 2 1/4" x O.D 3" x L 3"
Item Completely washable
Chrome caps, dark gray foam, water-retardant foam element
Rubber base for perfect fit
Looks like new after every cleaning
Jetting changes may be required
*For 1981 and newer models use carb O.D. for fitment. (Please refer to sizing chart.)
**Not legal for sale or use on California pollution controlled vehicles.
$34.99
-
"3.1 Gal King STR"
3.1 Gal King STR Tank 1954 to 1978 sportsters direct fit or Custom Application---- 1/4" Rear Petcok location for total fuel usage (PETCOCK NOT INCLUDED)-----Clear Fuel Hose sight gauge with chrome fittings ans stainless wire for hose clamping---- Pressure Tested ----NOT Sealed----Gas Cap (NOT included)
$200
-
FRISCO "STR"
For Frisco Style Mounting high atop the backbone 2.5 GAL
$190
-
Speed Box
Made from 1/8" Steel----aluminum battery strap----Stainless Steel fasteners-----Fits Odyssey 545 & 680 and other batteries with dimensions 7 5/16"Lg x 3 7/16" W x 5"T---Stainless steel hardware
$110
-
Fuel Sight Gauge Kit
10" Clear Fuel Hose----(2) weld in bungs ----(2) chrome 90 deg fittings -----Stainless wire for hose clamping
$20
-
90 Degree P-Cok
90 Degree P-cok / 1/4" NPT Threads 5/16" Barb
$15
-
"A" Brkt
Model "A" Tail light bracket----1/8" Steel----Stainless steel hardware
$100
-
Add Speed Cap to our tank
This cap can be added to any of our tanks. Please specify Left-Right-Center when ordering. Speed Cap Assembly is made of 304L S.S. 1 1/2" I.D Opening -----Teflon Seal --- Total Height 1 1/2"
$100
-
Gas Cap
Gas Cap for custom tanks
$15
-
Odyssey Battery 545
Odyssey Battery Model PC545MJ & PC680MJ --------Metal Jacket for duralbility.------Odyssey is the battery that pumps out instant power for unbeatable performance. These dynamic power sources incorporate a rugged sealed design,combined with all the safety and vibration-resistant features you’d expect from the world’s leading drycell battery.
$120
-
"Fuck U" Tail ligt kit
Model "A" Tail light kit with "Fuck U" Lens
$75
-
Fuck U Tail Light Lens ONLY
Model "A" Tail Light Lens for our lights Lens ONLY
$30
-
35 mm Pandemonium Brake Kit
Pandemonium Brake Kit for 35mm XS650---Adding the Pandemonium Brake Kit ™ to your Yamaha XS650 is a pretty straightforward process. With the addition of a Brembo brake caliper. You will have Pandemonium Brakes!
$39.99
-
XS650 Exhaust Kit
This Complete XS650 Exhaust Kit includes everything needed to build your entire exhaust. Items listed are included!
$99
-
Condor
This Fully Adjustable wheel locking system is capable of accepting front or rear wheels 15" - 22" or 80-220 mm wide.
The patented locking mechanism securely supports your motorcycle in an upright position on any type of flat surface or transport platform.
Requires only one person to load or unload any motorcycle in most cases.
$210
-
Brass Petcock
1/4" NPT All Brass
Accepts 5/16" & 3/8" Hose
$25
-
Pandemonium Speed Cap (ONLY)
Speed Cap Assembly is made of 304L S.S. 1 1/2" I.D Opening -----Teflon Seal --- Total Height 1 1/2"
$50
-
34 mm Pandemonium Brake Kit tm
Pandemonium Brake Kit for 34mm XS650---Adding the Pandemonium Brake Kit ™ to your Yamaha XS650 is a pretty straightforward process. With the addition of a Brembo brake caliper. You will have Pandemonium Brakes!
$39.99
-
Pandemonium XS650 Exhaust System
XS650 Exhaust System
1 1/2 Mandrel Bent Tubing
Exhaust Gaskets
Tig Welded Construction
Laser Cut Flanges
Stainless Steel Fasteners
Sold in Raw Finish
Only $209 + Shipping
$199
-
3" Bolt On Mirror
3" Dia Bolt on Mirror
$14.99
-
Foot Pegs
Stud mount footpeg set features chopper style pegs with original sand cast finish with mounting blocks. Stud has 3/8" x 20 threads.
Fits:
All with 7/16" x 20 mount hole
$34.95
-
34 MM Fork Seal
34 MM Fork Seals
$7.99
-
35 MM Fork Seals
35 MM Fork Seals
$7.99
-
4.5 " Chrome Mini Headlight
Chrome plated mini headlight designed for use on highway bars as additional lighting. 12V, 30 Watt sealed beam, Hi-Lo indicator light, and bottom mount are all included. Parts also available separately.
$34.99